Composition structure of weeding machine

Lawn mower is also called lawn mower, which is composed of cutter head, engine, walking wheel, walking mechanism, blade, handrail and control part. It is composed of parallel four-bar lifting device, frame, left and right single-wing weeding device, whole machine deflection adjustment device, rotary bevel gear driving mechanism and comb tooth imitation depth adjustment device. The efficiency is 8 to 10 times higher than that of artificial weeding, the rate of seedling injury is low, and the rate of seedling removal is high.

1. Weeding device

Weeding width: 900mm;

Driving mode: V belt;

Maximum operating radius: 3.7m.

2. Hydraulic power device

The hydraulic fast connection in the front of the vehicle leads out the power, drives the weeding machine device, controls the left/right, up/down action of the mechanical arm, including weeding device hydraulic motor; Mechanical arm hydraulic cylinder; Single oil saving cylinder; Double oil saving cylinder; Anti-impact cylinder; Weeding machine Angle adjustment cylinder; Support cylinder.

3. Mechanical arm system

Weeding device is installed at the end of the mechanical arm, 2 mechanical arm, can adjust various angles freely. The shape of the arm is quadrangular, and the material is high strength steel plate.

4. Control system

The left/right, up/down actions of the weeding device and the mechanical arm are operated by a single person on the control panel of the cab.